http://www.justputt.com/fujikura-rombax/
 |
| Powered by phpBay Pro |
Difference between D3.5 and D5 swingweight on my driver?
I was just curious what the real differences between my old Tour Burner TP and my new Burner TP 09' are going to be. My old driver was stock with a 75g X-Stiff Fujikura Rombax. My new driver is 45 inches with a 73g X-Stiff Mitsubishi Fubuki. I'm afraid that my new driver is going to feel too light compared to what I'm used to. What should I expect?
I am a scratch collegiate golfer and I feel everything when it comes to clubs. I prefer a heavier feeling head otherwise I lose it at the top and get too quick. What I should've asked was considering the way my old club was setup, how will or should my new one compare? I don't want to have to resort to lead tape to compensate for lack of head weight.
Robert,
The difference between swingweight points is 4 grams. Without knowing the head weights, as well as the weight of the grips, you can't even estimate what your swingweight is. However, with what you have listed and supposing that the head weights are the same as well as the grip weight then I would say that your new club is between 1/2 and 3/4 a swingweight point lighter.
The difference between a D3.5 and a D5 is 6 grams. And that is only if the 2 clubs are the same length. You can lower the swingweight of a club by at least 1 to 3 points for every inch it is shorter then the other club. In order to do this you have to also consider the total weight of the club.
In order to get the new one feeling like the old one (if they are the same length, same head weight, same grip weight) is to remove the head and insert a head or shaft weight. With the way you have said this is set up that would be a 6 gram weight. They are made to slip into the end of the shaft. Some clubheads also have weight ports cut into the bottom of the hosels. Epoxy one of these weights into either the shaft or clubhead and then epoxy the shaft back into the clubhead. At this point the swingweights of both old and new clubs should be the same.
Hope this helped
J
|
 Fujikura Rombax 7Z08 Shaft For Titleist 910 Fairway  US $299.99
|
 Fujikura Rombax Pro95 Shaft For Titleist 910 Fairway US $299.99
|
 Fujikura Rombax 7Z08 Shaft For Titleist 910 Driver US $299.99
|
 Fujikura Rombax 6X07 Shaft For Titleist 910 Fairway US $299.99
|
 Fujikura Rombax Pro95 Shaft For Titleist 910 Driver US $299.99
|
 Fujikura Rombax Type X 65 Stiff S Flex 47 NEW US $292.37
|
 Fujikura Rombax Type X 75 Stiff S Flex 47 NEW US $292.37
|
 NEW TOUR ISSUE Fujikura Rombax Type X 75X 75g X Stiff US $275.00
|
 NEW TOUR ISSUE Fujikura Rombax Type X 65 or 75 Stiff or X Stiff US $275.00
|
 Brand New Fujikura Rombax 4F09 R3 Senior Driver wood US $275.00
|
 Brand New Fujikura Rombax 4F09 R Regular Driver wood US $275.00
|
 Brand New Fujikura Rombax 4Z08 R2 Soft R Driver wood US $275.00
|
 fujikura Rombax 6w06 US $235.00
|
 CALLAWAY DIABLO OCTANE TOUR DRIVER 85 CUSTOM FUJIKURA ROMBAX Shaft S US $234.95
|
 NEW 95 COBRA ZL DRIVER WITH FUJIKURA ROMBAX RORYs Shaft AND MOTORE F1 SHAFTS US $229.99
|
 Fujikura Rombax GOLD 7x07 Stiff Shaft 46 US $199.99
|
 Fujikura Rombax GOLD 6x07 Stiff Shaft 46 US $199.99
|
 Fujikura Rombax GOLD 5x07 Regular Shaft 46 US $199.99
|
 Fujikura Rombax 7W06 pull out 5 wood shaft Stiff 335 US $174.99
|
 Callaway i Mix Fujikura ROMBAX 6X07 S Flex Super Premium I MIX Shaft US $155.55
|
 Fujikura Rombax 6W06 Graphite Shaft STIFF US $225.00
|
 Fujikura Rombax 9e05 Iron Shafts 5 PW US $126.50
|
 FUJIKURA ROMBAX 7W06 GRAPHITE SHAFT US $125.00
|
 TaylorMade TP 75 Rombax S Flex Driver Shaft by Fujikura Japan Tour Preferred US $125.00
|
 FUJIKURA ROMBAX 7W06 GRAPHITE SHAFT STIFF FLEX for TaylorMade Driver US $120.00
|
 TaylorMade Burner Rescue 3 Hybrid T3 Hybrid 20 Fujikura Rombax 8D07HB X Flex US $115.00
|
| Powered by phpBay Pro |
